TERMS



 
Entire Agreement

This order together with any written documents which may be incorporated by specific reference herein constitutes the entire agreement between the parties. No stipulations, representations or agreements by Royal Arms International Hereafter referred to as the “Seller” or any of its officers, purchasers, agents or employee’s shall be binding on the sale unless contained in this order or incorporated herein by reference as above provided. If the terms of this order conflict with any understandings, transactions, and communications or writings of the “Buyer” including without limited to generality of the foregoing, the buyers purchase order and regardless whether they originated or are dated before or after this order the terms of this order shall prevail.

Changes

Upon notice to the buyer the Seller may change quantities, deliveries schedules and or specifications in respect of any part or parts of the goods, work, services or related material (collectively referred to in this invoice as Goods) not yet delivered by the seller.

International

Agent does not have the right to, receive returns, or negotiate different terms not authorized by company in writing. All legal disputes will be settled in a U.S. jurisdiction or court. Company reserves the right to refuse any order. All orders are subject to US State Department or US Department of Commerce approval. Due to the nature of Bomb Disposal Equipment and Ammunition, as well as, Tactical Equipment and Ammunition products, sales will be made ONLY TO POLICE, STATE AND MILITARY AGENCIES OR THEIR AUTHORIZED PERSONNEL. UNDER NO CIRCUMSTANCE SHALL COMPANY SHIP PRIVATE PARTY ORDERS WITHOUT A LOCAL GOVERNMENT AGENCY APPROVAL.

This order requires the following: End User certificate (DSP 83) and Import License from your countries Customs for acceptance of Dangerous Good Shipment

(b) The Company prices for Export are net based upon US domestic current printed Company prices. All Company prices are subject to change without notification. If Agent is the buyer, the price is at U.S. domestic current printed Company prices. If the buyer (End User) is not the agent the buyers prices will increased the Companies prices to allow for a maximum of 35% to be paid to the agent on receipt of invoices pay in full. Mark-up above our prices shall be no higher than 35% Shipping costs are not subject to commission.

(c) Terms: Credit Card payment in advance (cleared by issuing institution); Wire Transfer in US funds on presentation of shipping documents by fax; or Irrevocable Letter of Credit on an acceptable International Bank and L.O.C. terms. All shipments shall be EXW (Los Angeles) or FOB (Los Angeles) destination is required, all shipping charges will be added to prices being quoted

ACCEPTANCE

Unless otherwise stated in a writing signed by Seller’s duly authorized agent (Johnathan Brill, President, Royal Arms International, inc) all quotations covering Seller’s products are made and all contracts or orders for said products are accepted and all shipments are made on the condition that the Standard Terms and Conditions of Sale set forth herein shall be applicable. Any term in Buyer’s purchase order or acceptance in addition to or not identical with these Terms and Conditions of Sale is objected to and these Terms and Conditions of Sale shall not be varied, qualified, modified, amended or interpreted by any prior course of dealing between the parties or by any usage or trade or in any manner other than by subsequent writing signed by Seller’s duly authorized agent. All orders or contracts must be approved and accepted by a duly authorized agent of Seller. These Terms and Conditions of Sale shall be applicable whether or not they are attached to or enclosed with the products to be sold hereunder.

PRICES

Unless otherwise indicated in writing from the Seller, the prices set fourth in this order are in United States Dollars (U.S.D.). If the purchase price is not stated on this order, the subject goods will be billed at time of delivery. Prices are subject to change without notice, and Seller’s price in effect at the time of shipment will apply.

CANCELLATION

An order once placed with and accepted by Seller can be cancelled only with Seller’s consent and upon payment to Seller of reasonable cancellation charges which shall take into account expenses already incurred, commitments made, and Sellers anticipated profit.

TAXES

The amount of any present or future sales, revenue, excise or other tax applicable to the products covered by this order, or the manufacture or sale thereof, shall be added to the purchase price and shall be paid by the Buyer or, in lieu thereof, Buyer shall provide Seller with an appropriate tax exemption certificate.

DELIVERY

Shipping dates are approximate and are based upon prompt receipt from Buyer of all necessary information. In no event will Seller be liable for damages of any kind arising out of delay or non-delivery, due to causes beyond its reasonable control including, but not limited to, acts of God, acts of civil or military authority, war, riots, fire, explosion, flood, strike, lockout, injunction, accident, breakage of machinery or apparatus, or inability to obtain fuel, power, raw materials, labor, containers or transportation facilities. In the event of any such delay, the date of delivery shall, at the request of Seller, be deferred for a period equal to the time lost by reason of the delay.

RISK

The subject goods shall remain the responsibility of and the risk of the seller until such goods are received by carrier for transportation to buyer, buyer’s third party or agent. In the event of rejection of such goods, the buyer shall be responsible for all goods, packing and all shipping cost related to original transport and return transport and shall be liable for all damages, costs and expenses resulting from problems relating thereto, and shall remain the responsibility and risk of the buyer until such goods are actually received and accepted by the seller.

INSURANCE

The Seller may provide insurance coverage upon request of the buyer discretion. However if no insurance is purchased buyer assumes all responsibility during transportation and receipt. Insurance coverage in respect of the subject goods for such periods, in such amounts, on such terms as the Seller shall reasonably direct the buyer to purchase upon time of shipment.

PAYMENT.

(a) Unless otherwise specified on the invoice, all accounts are due and payable Twenty (20) days from the date of invoice. Accounts extending beyond the terms will be subject to a service charge of 2% per month (24% per annum) or such greater amount as may be authorized by law and specified in the invoice. Discounts for prompt payment do not apply to labor and shipping charges, and no discounts other than those noted on the invoice are authorized. Shipments, deliveries and performance of work shall at all times be subject to the approval of Seller’s credit department, and the Seller may at any time decline to make any shipments or deliveries or perform any work, except upon receipt of payment or upon terms and conditions of security satisfactory to such department. All lien rights are reserved until full payment of the invoice has been made.

(b) If, in Seller’s judgment, the financial condition of the Buyer at any time does not justify continuation of production or shipment on the terms of payment originally specified, the Seller may require full or partial payments in advance and in the event of the bankruptcy or insolvency to the Buyer or in the event any proceeding is brought by or against Buyer under the bankruptcy or insolvency laws, the Seller shall be entitled to cancel any order then outstanding and shall receive reimbursement for its cancellation charges.

(c) Should Seller initiate any legal action or proceeding to collect on any unpaid invoice or to enforce any of the terms hereof, Seller shall be entitled to recover from Buyer all costs and expenses incurred in connection therewith, including court costs and reasonable attorney’s fees.

(d) International Terms: Credit Card payment in advance (cleared by issuing institution); Wire Transfer in US funds on presentation of shipping documents by fax; or Irrevocable Letter of Credit on an acceptable International Bank and L.O.C. terms. All shipments shall be EXW (Los Angeles) or FOB (Los Angeles) destination is required, all shipping charges will be added to prices being quoted

CONFIDENTIAL INFORMATION

All information pertaining to the business and affairs of each of the parties hereto and obtained as a result of or in respect of the relationship between the parties relating to this order shall be kept and maintained in confidence and treated as confidential information

(b) Proprietary Material Of Royal Arms International. Recipient party ensures that such information shall not be used, transmitted, reproduced or otherwise disclosed, directly or indirectly, by Recipient or anyone in private therewith, to any third party, person or organization without the express of written consent from Royal Arms International.

INDEMNITY

The buyer hereby indemnifies and holds harmless the seller from and against all damages,costs, expenses, charges, losses, demands or liabilities whatsoever and including, without limit, claims of third parties arising from or incidental to any failure by the buyer to perform and discharge its obligations and liabilities herein in respect of such goods, including without limitation, breech of any warranties provided herein; this indemnity is in addition to and shall not affect any other indemnity referred to herein.

CLAIMS AND RETURNS

(a) Claims for shipping damages shall be made against the carrier on all products shipped F.O.B. shipping point. On products shipped F.O.B. destination, Buyer shall notify Seller of shipping damages within ten (10) days from date of receipt and afford Seller a reasonable opportunity to inspect the products. No products shall be returned without Seller’s consent.

(b) Claims for shortage or inaccurate filling of orders shall be submitted to Seller within ten (10) days after Buyer’s receipt, accompanied by a copy of the invoice or shipper on which the products were purchased. Buyer will then receive from Seller a Returned Merchandise authorization (RMA) number. Products returned without the RMA authorization number will be refused. If Seller in good faith determines that any error was not Seller’s, a minimum 15% restocking charge will be made to Buyer on any products returned for credit or exchange.

(c) Claims or notices asserting a defective product must be given to Seller immediately upon discovery of such defect, but in any event no more than one year after date of shipment by Seller, and must include a copy of the invoice or shipper on which the products were purchased, evidence that such products were inspected within ten (10) days after Buyer’s receipt, and the details of the defect(s) claimed, and afford the Seller a reasonable opportunity to inspect the products.

LIMITATION ON DAMAGES. In no event shall any liability of Seller exceed the purchase price of the product and Seller shall not be liable for incidental, special or consequential damages with respect to the sale or use of the product, including without limitation, labor charges, lost profits, expenses of repair, other costs incident to replacement, or transportation costs incurred in shipping products to or from Seller’s plant.

INFORMATION. Seller does not, by any advice or information it may provide regarding the use of any product by Buyer, make any warranty beyond the description on the face hereof including of merchantability or fitness for a particular purpose or assume any liability for such advice or information given, orally or in print, or for the results obtained by Buyer. Buyer assumes all risk and liability which may result from the use of any products, whether singly or in combination with other products. No suggestion for product use shall be construed as a recommendation for use in infringement on any existing patent.

(d) Seller is under no obligation to take back material for credit or exchange when the reason for the return was anything other than the Seller’s error. At Seller’s sole discretion, should a return of this nature be authorized, the items returned must be of current manufacture, in its original packaging with all original manuals and/or documentation, and be in resalable condition. A minimum 15% restocking charge will apply as well as any additional charges necessary to restore items to a resalable condition.

LIMITED WARRANTY ON PRODUCTS MANUFACTURED BY SELLER

The Seller warrants to the original purchaser that products of its own manufacture to be delivered hereunder will be free from defects in materials or workmanship under normal use and service for a period of one year from date of shipment. Seller’s obligations under this Warranty are limited to replacing or repairing or giving credit for, at its option and at any of its plants, any of said products which shall, within one year after shipment, be returned to Seller’s plant of origin, transportation charges prepaid, and which are, after products examination, disclosed to the Seller’s satisfaction to be thus defective. This Warranty does not apply to defects caused by shipping damages, or to any products manufactured by Seller which have been subject to improper installation, misuse, neglect, accident, ordinary wear and tear, or Buyer’s attempts to use any product beyond its mechanical, thermal or electrical capacity. The aforementioned provisions do not extend the original Warranty period of any product that has either been repaired or replaced by Seller.

THIS LIMITED WARRANTY OF SELLER, SUBJECT TO THE LIMITATION ON DAMAGES, IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED, STATUTORY, OR IMPLIED BEYOND THE DESCRIPTION ON THE FACE HEREOF, INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND OF ALL OTHER LIABILITIES OR OBLIGATIONS ON THE SELLER’S PART, AND SELLER NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITIES IN CONNECTION WITH THE SALE OF THE SAID PRODUCTS. THIS LIMITED WARRANTY MAY NOT BE VERBALLY CHANGED OR MODIFIED BY ANY REPRESENTATIVE OF SELLER.

DISCLAIMER OF SELLER’S WARRANTY ON PRODUCTS MANUFACTURED BY OTHERS

Products not manufactured by Seller are covered, if at all, by the original manufacturer’s warranty, copies of which are available on Buyer’s request. Seller makes no warranty or representation whatsoever, expressed or implied, beyond the description on the face hereof including the warranty of merchantability and fitness for a particular purpose, with respect to products not manufactured by Seller.

APPLICABLE LAW

The validity, performance and construction of these terms and all sales there under shall be governed by the laws of the state in which Buyer’s order is accepted by Seller.

CHECK FOR DAMAGE & VERIFY CONTENTS UPON RECEIPT

ANY OBVIOUS DAMAGE TO THE CARTON OR PACKAGES SHOULD BE IMMEDIATELY BROUGHT TO THE ATTENTION OF THE CARRIER DELIVERING THE SHIPMENT TO YOU AND NOTED ON THE DELIVERY RECEIPT. IF CONCEALED DAMAGE IS DISCOVERED WHEN MERCHANDISE IN UNPACKED, SAVE THE PACKAGES AND NOTIFY THE CARRIER FOR INSPECTION. YOUR CLAIM FOR DAMAGED MATERIALS SHOULD BE FILED AT ONCE WITH THE TRANSPORTATION COMPANY, AS THE RESPONSIBILITY OF ROYAL ARMS INTERNATIONAL PRODUCTS CEASES UPON DELIVERY TO THE CARRIER AT THE SHIPPING POINT. SHOULD YOU NEED ASSISTANCE WITH THE CLAIM, WE WILL BE GLAD TO HELP.

CLAIMS FOR SHORTAGES OR INACCURATE FILLINGS MUST BE MADE TO ROYAL ARMS INTERNATIONAL WITHIN TEN DAYS AFTER RECEIPT OF GOODS. THERE IS A MINIMUM OF 15% RESTOCKING CHARGE ON ANY UNUSED ITEMS RETURNED FOR CREDIT OR EXCHANGE WHEN ROYAL ARMS INTERNATIONAL IS NOT IN ERROR.

RETURNED GOODS WILL BE ACCEPTED ONLY WITH PRIOR APPROVAL.

All International Orders and Exports of Disrupters, Explosives & Firearms are subject to Department of State DDTC, ITAR, Department of Commerce & Department of Transportation approval. A valid Export License and or Import Permit will be required prior to any shipment. Generally all orders for export are 8-12 weeks minimum lead time based on Quantity and Commodity ordered.

Required Documents / Info:
1. Official Purchase Order on Letterhead
2. DSP-83
3. End User Certificate
4. Import Permit
5. Export License (Royal Arms will apply for)
6. Consignee: (Your Company )
NAME ?
Address city zip ?
Phone ?
Email ?
7. Delivery Address: (End User)
NAME ?
Address city zip ?
Phone ?
Email ?
8. Ultimate Consignee Info Address (Purchaser / End User )
NAME ?
Address city zip ?
Phone ?
Email ?
9. End User Info (Foreign End user )
NAME ?
Address city zip ?
Phone ?
Email ?

Payment Terms:
50% DOWN
50% Prior to Shipment.

Royal Arms must receive a 50% deposit, before we guarantee the start of your order and put you on the production schedule. All payments must be Wire Transfer in US Funds, Royal Arms will NOT accept a Letter of Credit. Royal Arms must receive the remaining Balance upon completion of order and prior to shipment / release.

Shipping: EX Works / FCA Origin
Royal Arms will arrange for all of the Export Licensing, Packaging, Crating and shipment preparation to export / deliver the goods to your country unless otherwise specified. It is the Buyers responsibility to pay for all freight charges related to the export / shipment. Royal Arms will bill these charges prior to shipment. Payment will be required prior to the release of the shipment. Royal Arms can also arrange to ship the goods to a Freight forwarder / Exporter in the United States of your choice. However please note that if you choose to use your own forwarders Royal Arms will not be responsible for any delays and or rejections of your shipment due to your forwarders lack of knowledge in exporting our equipment i.e. Disrupters, Ammunition, Firearms & Explosives

APO FPO DPO
All orders shipping to U.S. Military addresses must comply with U.S. Export Control Laws and Regulations. Under these laws, all shipments to an APO/FPO/DPO are considered international; therefore, export restrictions are applicable.

International Taxes & Fees:
The Buyer is responsible for all import fees, taxes, VAT or levies assessed to you by your country and Royal Arms International, Inc and RoyalArms.com are not responsible for such charges. These additional import fees, taxes and levies may or may not be added by your Customs officials.

Legal Disclaimers:
Royal Arms International, Inc. reserves the right to inquire into the end user, end use, and country of ultimate destination of any product ordered.Export control laws and regulations are complex. Any summaries of such laws and regulations provided by Royal Arms International, Inc. herein are not comprehensive and are not to be taken as legal advice or counseling.

The sale, transfer, transportation, or shipment outside of the U.S. of any product prohibited or restricted for export without complying with U.S. export control laws and regulations, including proper export licensing, documentation or authorization, is strictly prohibited and may result in civil penalties and/or constitute a federal crime. Royal Arms International, Inc. will not engage in any transaction that requires the illegal export of any products and will not assist directly or indirectly with the illegal export or re-export of any products. An accurate Automated Export System (AES) filing must be made, whether or not the exportation requires a license.

If you wish to purchase an item for ultimate shipment or use outside of the United States, please indicate this fact in your order. Depending on the value of the order, specific item(s), end user, country of ultimate destination and end use, Royal Arms International, Inc. may be required to apply for an export license with the appropriate U.S. government agency. Almost all Royal Arms items on the website Require an Export License, including, but not limited to, the following:

• EOD Bomb Disposal Equipment
• Tactical Breaching Equipment
• Ammunition
• Firearms
• AR15 Parts
• Explosives

International Traffic in Arms Regulations (ITAR): Most item(s) on this website are subject to the International Traffic in Arms Regulations (ITAR), and export is strictly prohibited without authorization or a license issued by the U.S. Department of State’s Directorate of Defense Trade Controls. By proceeding with a transaction to purchase any ITAR restricted item(s), the Customer certifies that (i) the purchase does not require Royal Arms International, Inc. to export such items, unless Royal Arms International, Inc. is aware of the export and has obtained the appropriate U.S. Government authorization; (ii) the Customer does not intend to export such items after receipt from Royal Arms International, Inc. without the appropriate U.S. Government export authorization; (iii) the Customer does not intend to export, transfer, sell, or furnish the item to any foreign person, whether abroad or in the U.S., including any Foreign Embassy in the U.S., without the appropriate U.S. Government export authorization; (iv) the Customer understands that a foreign person under the ITAR § 120.16 means “any natural person who is not a lawful permanent resident as defined by 8 U.S.C. § 1101(a)(20) or who is not a protected individual as defined by 8 U.S.C. § 1324b(a)(3),” and can mean “any foreign corporation, business association, trust, society, or any other entity or group that is not incorporated or organized to do business in the U.S., as well as international organizations, foreign governments, and any agency or subdivisions of government (e.g. diplomatic missions)” (See ITAR § 120.16); (v) the Customer is a U.S. Person as defined by ITAR § 120.15, meaning the Customer is a lawful permanent resident of the U.S., as defined by 8 U.S.C. § 1101(a)(20), or is a protected individual as defined by 8 U.S.C. § 1324b(a)(3), or is a “corporation, business association, partnership, society, trust, or any other entity, organization or group that is incorporated to do business in the U.S., or is a governmental (federal, state, or local) entity” (See ITAR § 120.15).

Export Administration Regulations (EAR): Some of the item(s) on this website are subject to the Export Administration Regulations (EAR), and export may be restricted by the U.S. Department of Commerce’s Bureau of Industry and Security. By proceeding with a transaction to purchase any restricted item(s), the Customer certifies that (i) the purchase does not require Royal Arms International, Inc. to export such items, unless Royal Arms International, Inc. is aware of the export and has obtained the appropriate U.S. Government authorization; (ii) the Customer does not intend to export such items after receipt from Royal Arms International, Inc. without the appropriate U.S. Government export authorization.

Important Export Restrictions Warning!
(1) Export of Royal Arms International, Inc. products is strictly prohibited without a valid export license issued by the U.S. Department of State, in accordance with International Traffic in Arms Regulations (ITAR) (22 C.F.R. 120-130) or a valid export license issued by the U.S. Department of Commerce, in accordance with the Export Administration Regulations (EAR) (15 C.F.R. 730-774).

(2) U.S. law prohibits the sale, transfer, or export of items to certain restricted parties, destinations, and embargoed countries, as identified on lists maintained by the U.S. Department of State, the U.S. Department of Commerce, and the U.S. Department of Treasury. It is the responsibility of the Customer to be aware of these lists, which can be found at the following U.S. Government websites. By proceeding with any transaction, the Customer certifies that the Customer will not engage in any unauthorized transaction involving the export of Royal Arms International, Inc. products to any restricted parties or destinations.

By proceeding with a transaction to purchase any items from Royal Arms International, Inc., the Customer certifies that it will comply with all requirements imposed by all applicable laws, regulations and administrative policies.

For further information regarding the applicable laws, regulations, and policies contact:

• U.S. Department of Commerce
• Bureau of Industry and Security
• Tel.: (202) 482-4811
• Website: http://www.bis.doc.gov

• U.S. Department of State
• Bureau of Political-Military Affairs
• Directorate of Defense Trade Control
• Tel.: (202) 663-1282
• Website: http://www.pmddtc.state.gov

• U.S. Department of the Treasury
• Office of Foreign Assets Controls
• Tel.: (202) 622-2480
• Website: http://www.treas.gov/offices/enforcement/ofac

Disclaimer

All information provided on this Website is subject to change without notice. While efforts have been made to make this website helpful and accurate, due to the open nature of this website and the potential for errors in the storage and transmission of digital information, Royal Arms International, Inc. and RoyalArms.com do not warrant the accuracy of information obtained from this Web site.

ALL MATERIALS AND INFORMATION POSTED AND AVAILABLE ON THIS SITE IS PROVIDED “AS IS”, “AS AVAILABLE” AND WITHOUT WARRANTIES EXPRESS OR IMPLIED. Royal Arms International AND RoyalArms.com DISCLAIM ALL WARRANTIES INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Royal Arms International AND RoyalArms.com DOES NOT WARRANT THAT FUNCTIONS CONTAINED ON THIS SITE AND ANY SERVICES PROVIDED WITHIN WILL BE UNINTERUPPTED OR ERROR-FREE, THAT DEFECTS WILL BE CORRECTED, OR THAT THIS SITE OR THE SERVER(S) ARE FREE OF VIRUSES OR OTHER HARMFUL COMPONENTS. RoyalArms.com DOES NOT WARRANT OR REPRESENT THE USE OF THE MATERIALS ON THIS SITE IN TERMS OF THEIR CORRECTNESS, ACCURACY, RELIABILITY, OR OTHERWISE. YOU UNDERSTAND AND AGREE THAT YOU DOWNLOAD OR OTHERWISE OBTAIN MATERIAL OR DATA THROUGH THE USE OF THE RoyalArms.com WEBSITE AT YOUR OWN DISCRETION AND RISK AND THAT YOU WILL BE SOLELY RESPONSIBLE FOR ANY DAMAGES TO YOUR COMPUTER SYSTEM OR LOSS OF DATA THAT RESULTS FROM THE DOWNLOAD OF SUCH MATERIAL OR DATA WHETHER THE DAMAGES ARISE FROM USE OR MISUSE OF THE RoyalArms.com WEBSITE.

YOUR USE OF THIS WEBSITE AND ITS ASSOCIATED WEBSITES CONSTITUTES AGREEMENT TO AND ACCEPTANCE OF ALL WEBSITE TERMS OF USE AND THAT ANY DISPUTES THAT MAY ARISE WILL BE GOVERNED BY THE LAWS OF THE STATE OF CALIFORNIA.

Access to, and Use of, Information

Access to this Website is limited to viewing the linked Web pages solely for legitimate business purposes to access the information provided by RoyalArms.com at this Web site. Any access or attempt to access other areas of the RoyalArms.com computer system or other information contained on the system for any reason is strictly prohibited. You may not use any information contained on this Website other than in connection with a legitimate business purpose.

RoyalArms.com provides access to discussion groups or forums which are governed by additional terms that you are required to accept at the time you register to access Discussions. Use of discussion groups or forums, and any information provided on them is at your own risk and subject to these terms and the Terms of Use for Discussion Forums.

Content Linked to by RoyalArms.com

This website may be linked to other sites which are not maintained by RoyalArms.com. RoyalArms.com is not responsible for, and exercises no control over, the content of those sites. The inclusion of any link to such sites does not imply an endorsement, sponsorship, or recommendation by RoyalArms.com of the sites. RoyalArms.com disclaims any liability for links: (a) from another website to RoyalArms.com; and (b) to another website from RoyalArms.com.

We may link to or promote services or software from other companies on RoyalArms.com or offer you the ability to download software from other companies. You agree that we are not responsible for, and do not control, those websites, services and software.

Copyright

All materials contained on this Site are subject to the ownership rights of Royal Arms International and its Supplier Partners and attributed sources. RoyalArms.com hereby authorizes you to make a single copy of the content herein for your use in learning about, evaluating, or acquiring RoyalArms.com services or products. You agree that any copy made must include the RoyalArms.com copyright notice. No other permission is granted to you to print, copy, reproduce, distribute, transmit, upload, download, store, display in public, alter, or modify the content contained on this Site. To inquire or request consent for this and other matters, please contact the RoyalArms.com webmaster.

Trademarks

This Web site contains many Royal Arms International and third-party trademarks and service marks. All marks are the property of their respective companies. All rights in the intellectual property contained in this Web site including copyright, trademarks, trade secret and patent rights are reserved. Access to this Website does not constitute a right to copy or use any of the intellectual property of Royal Arms International or its suppliers. Statutory notice contained herein represents trademark status in the United States.

Submissions

All remarks, suggestions, ideas, graphics or other information communicated to RoyalArms.com through this Site and Discussion Forums will forever be the property of Royal Arms International. Unless specifically acknowledged in writing by Royal Arms International, all material submitted to RoyalArms.com will be presumed to be public and RoyalArms.com will not be required to treat the information as confidential. Royal Arms International shall have exclusive ownership of all present and future existing rights in the information, without compensation to the person sending the information.

CLICK HERE TO INITIATE A RETURN

Please click on the link above to complete the Return Notice Form. Please be advised, you have 30 days to return an item, unused, unmodified, within 30 days of purchase. You may also use this form to send back items for repair. We are not responsible for lost items being returned to us.

CLAIMS AND RETURNS (a) Claims for shipping damages shall be made against the carrier on all products shipped F.O.B. shipping point. On products shipped F.O.B. destination, Buyer shall notify Seller of shipping damages within ten (10) days from date of receipt and afford Seller a reasonable opportunity to inspect the products. No products shall be returned without Seller’s consent. (b) Claims for shortage or inaccurate filling of orders shall be submitted to Seller within ten (10) days after Buyer’s receipt, accompanied by a copy of the invoice or shipper on which the products were purchased. Buyer will then receive from Seller a Returned Merchandise authorization (RMA) number. Products returned without the RMA authorization number will be refused. If Seller in good faith determines that any error was not Seller’s, a minimum 15% restocking charge will be made to Buyer on any products returned for credit or exchange. (c) Claims or notices asserting a defective product must be given to Seller immediately upon discovery of such defect, but in any event no more than one year after date of shipment by Seller, and must include a copy of the invoice or shipper on which the products were purchased, evidence that such products were inspected within ten (10) days after Buyer’s receipt, and the details of the defect(s) claimed, and afford the Seller a reasonable opportunity to inspect the products.

LIMITATION ON DAMAGES. In no event shall any liability of Seller exceed the purchase price of the product and Seller shall not be liable for incidental, special or consequential damages with respect to the sale or use of the product, including without limitation, labor charges, lost profits, expenses of repair, other costs incident to replacement, or transportation costs incurred in shipping products to or from Seller’s plant. INFORMATION. Seller does not, by any advice or information it may provide regarding the use of any product by Buyer, make any warranty beyond the description on the face hereof including of merchantability or fitness for a particular purpose or assume any liability for such advice or information given, orally or in print, or for the results obtained by Buyer. Buyer assumes all risk and liability which may result from the use of any products, whether singly or in combination with other products. No suggestion for product use shall be construed as a recommendation for use in infringement on any existing patent. (d) Seller is under no obligation to take back material for credit or exchange when the reason for the return was anything other than the Seller’s error. At Seller’s sole discretion, should a return of this nature be authorized, the items returned must be of current manufacture, in its original packaging with all original manuals and/or documentation, and be in resalable condition. A minimum 15% restocking charge will apply as well as any additional charges necessary to restore items to a resalable condition.

LIMITED WARRANTY ON PRODUCTS MANUFACTURED BY SELLER The Seller warrants to the original purchaser that products of its own manufacture to be delivered hereunder will be free from defects in materials or workmanship under normal use and service for a period of one year from date of shipment. Seller’s obligations under this Warranty are limited to replacing or repairing or giving credit for, at its option and at any of its plants, any of said products which shall, within one year after shipment, be returned to Seller’s plant of origin, transportation charges prepaid, and which are, after products examination, disclosed to the Seller’s satisfaction to be thus defective. This Warranty does not apply to defects caused by shipping damages, or to any products manufactured by Seller which have been subject to improper installation, misuse, neglect, accident, ordinary wear and tear, or Buyer’s attempts to use any product beyond its mechanical, thermal or electrical capacity. The aforementioned provisions do not extend the original Warranty period of any product that has either been repaired or replaced by Seller.

THIS LIMITED WARRANTY OF SELLER, SUBJECT TO THE LIMITATION ON DAMAGES, IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED, STATUTORY, OR IMPLIED BEYOND THE DESCRIPTION ON THE FACE HEREOF, INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, AND OF ALL OTHER LIABILITIES OR OBLIGATIONS ON THE SELLER’S PART, AND SELLER NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITIES IN CONNECTION WITH THE SALE OF THE SAID PRODUCTS. THIS LIMITED WARRANTY MAY NOT BE VERBALLY CHANGED OR MODIFIED BY ANY REPRESENTATIVE OF SELLER.

DISCLAIMER OF SELLER’S WARRANTY ON PRODUCTS MANUFACTURED BY OTHERS Products not manufactured by Seller are covered, if at all, by the original manufacturer’s warranty, copies of which are available on Buyer’s request. Seller makes no warranty or representation whatsoever, expressed or implied, beyond the description on the face hereof including the warranty of merchantability and fitness for a particular purpose, with respect to products not manufactured by Seller.